Download the 2018 Cal Fire Frequency list: CalFire2018 

Radio Hotsheet (latest news on fire radios)

Contract No.: 54-3187-3-2

Item # 1  Synthesized PERSONAL PORTABLE  PLSH-14.14-H-1.5-B (ECONOMY) 

Frequency band: 150-174 MHz

Programmable CTCSS encoder/decoder with a minimum of 14 tones. Self contained programmable from keypad with provisions to disable capability for operator to change program. Digital display of operating frequency or channel. The information displayed by any alphanumeric display shall be accurate in all modes of operation. Both 12.5/25 kHz (Narrowband/Wideband) channel spacing capability in the same radio is a desired option for the UHF version. However, the UHF narrowband channel (12.5 kHz) spacing capability only shall be mandatory. Both the 12.5 kHz and 25 kHz Specification TABLE 4 apply.
Location: All Regions

CContract No.: 54-3187-3-28
Item # 4  Synthesized MOBILE (DASH-MOUNT)  MLPM-12.12-H-30-B (ECONOMY) 

Frequency band: 150-174 MHz

Programmable CTCSS encoder/decoder with a minimum of 14 tones. Self contained programmable with provisions to disable capability for operator to change program. Digital display of operating frequency or channel. The information displayed by any alphanumeric display shall be accurate in all modes of operation. Both 12.5/25 kHz (Narrowband/Wideband) channel spacing capability in the same radio is a desired option for the UHF version. However, the UHF narrowband channel (12.5 kHz) spacing capability only shall be mandatory. Both the 12.5 kHz and 25 kHz Specification TABLE 7 applies.
Location: All Regions

Contract No.: 54-3187-3-28
Item # 9  Synthesized BASE
BLPT-30.30-H-25-W (ECONOMY) 

Frequency Band: 150-174 MHz.

Programmable memory not programmed. Programmable CTCSS Encoder and Decoder. Lightning Protection Devices (Spec. 2.4) not required in basic configuration. The 12.5 kHz and 25 kHz Specification TABLE 10 apply with the following exception: Transmitter/Receiver freq. spread…..24 MHz.
Location: All Regions

U.S. FOREST SERVICE  Contract No.: 54-3187-3-2

Equipment Descriptions
EQUIPMENT DESCRIPTION As outlined on the US Forest Service Website

PART I – SECTION B – SUPPLIES OR SERVICES
SCHEDULE OF ITEMS  AWARDS For Solicitation WO-02-30VM

The Forest Service has developed an equipment designator to describe radio equipment on the Schedule of Items. The designator consists of six letters and three numbers; e.g., “PLSH-4.4-H-1.5-B”, “MEPM-4.4-H-50-B”, etc. The letters and numbers represent the characteristics required of the equipment being ordered. Characteristics are described in the identified sections of the Minimum Standard Specifications.  First Letter – Identifies equipment type (Specification 3.0):  B=Base M=Mobile P=Portable A=Aircraft  Second Letter – Identifies type of controls (Specification 4.0):
L=Local E=Extended R=Remote A=Aircraft  T=Local Test K=Repeater M=Microwave  Third Letter – Identifies type of microphone (Specification 5.0):
P=Palm-Held D=Desk Stand S=Self-Contained H=Headset  Fourth Letter – Identifies type of housing (Specification 6.0):
T=Table Top C=Compact Vertical F=Floor Mount  M=Mobile P=Packset Portable H=Personal Portable  N=19″ Rack G=Transportable Rptr A=Aircraft  Fifth Letter – Identifies the operating frequency band (Specification 2.10):
L=Low Band H=High Band U=UHF  Sixth Letter – Identifies the operating channel spacing (Specification 2.17):
N=12.5 kHz Only (Narrowband) W=15, 20, 25, or 30 kHz Only (Wideband)  B=Both 12.5 and 25 kHz (Narrowband/Wideband)  First Number – Identifies the transmit channel capacity (Specification 8.1.G)  Second Number – Identifies the receive channel capacity (Specification 7.1.K)  Third Number – Identifies the minimum transmitter carrier power output (Po) (Specification 8.1.A)  Examples: BASE BLDC-2.1-H-50-N – This designator describes a base radio with local controls, desk stand microphone, compact vertical cabinet, two channel transmitter, one channel receiver, operating in the high band, a minimum carrier power output of 50 watts, and 12.5 kHz operating channel spacing only.

BASE REPEATER BKPF-(1.1-U-25-N) (2.1-H-50-N) – Where more than one transmitter and/or receiver is ordered in the same housing, the multiple transmitter and/or receiver sections of the designator will be separated by parenthesis.  MOBILE M(X)PM-2.2-H-50-B – (X) is used for items not covered by the list of designators. A narrative description shall be provided.